INVENTOR AR1MVI-09WFR

Questions and Answers

E
Elizabeth LoganAug 14, 2025
Why is my INVENTOR Air Conditioner emitting mist?
- M
  Melanie CharlesAug 14, 2025
  In COOL mode, the mist is generated by condensation formed during the sudden cooling process. This is normal. Also, mist may be generated due to moisture from defrosting when the air conditioner restarts in HEAT mode after defrosting, which is also normal.
R
rushbryanAug 17, 2025
What to do if my INVENTOR Air Conditioner operation is delayed after restart?
- H
  Holly BonillaAug 17, 2025
  To prevent a fuse blowout, the compressor has a protection circuit that needs about 3 minutes to reset after you turn the power off and on quickly. Wait for about 3 minutes after restarting the unit.
P
Penny GuerreroAug 21, 2025
Why does my INVENTOR Air Conditioner fan speed change in heating mode?
- W
  William FloresAug 21, 2025
  The fan speed automatically changes in heating mode to prevent cold air from blowing onto occupants when heating starts, during automatic defrosting, or during low-temperature heating operation. This is normal operation in heating mode.
J
jill67Aug 25, 2025
Why does my INVENTOR Air Conditioner make low volume sounds?
- T
  tdennisAug 25, 2025
  Hissing, squeaking and rushing air sounds are normal operation sounds. Hissing sound may be heard during or after stopping the air conditioner and it is caused by refrigerant flowing. Squeaking sound is caused by the normal expansion and contraction of plastic and metal parts due to temperature changes. Rushing air occurs when the louver resets its position.
S
sjonesAug 27, 2025
What to do if my INVENTOR Air Conditioner heating stops and the defrost light blinks?
- C
  Carolyn HallAug 27, 2025
  When in HEAT mode, the indoor unit may temporarily stop for up to 10 minutes to automatically defrost. Wait for up to 10 minutes for the defrosting operation to complete.
A
Amber MunozAug 30, 2025
Why does my INVENTOR Air Conditioner discharge dust?
- T
  Timothy KochAug 30, 2025
  This may occur when the air conditioner is used for the first time or has not been used for a long time. This is normal when first using the unit or after a long period of inactivity.
V
vincentwoodsSep 2, 2025
What to do if my INVENTOR Air Conditioner operation is erratic?
- C
  Charles CrosbySep 3, 2025
  Interference from cell phone towers and remote boosters may cause the unit to malfunction. Disconnect the power and then re-connect. Alternatively, press the ON/OFF button on the remote controller to restart operation.
W
williamkellySep 6, 2025
Why does my INVENTOR Air Conditioner change to fan only while cooling or heating?
- A
  Arthur BarnesSep 6, 2025
  The room temperature may have reached the temperature setting on the remote control. If this is not the case, call your suitable contractor.
J
Joseph MuellerSep 10, 2025
Why does my INVENTOR Air Conditioner emit a peculiar odor?
- J
  Jim RobinsonSep 10, 2025
  Various smells generated from interior textile, furniture, or cigarette smoke absorbed into the air conditioner may be emitted. If this is not the case call your suitable contractor.