INVENTOR AR1MVI-09WFR User Manual

N A M E S O F PA R TS O P E R A T I N G IN S T R U C T I O NS
8. Connecting
9. Connecting
10. Stop valve
pipe
cable
Outdoor unit
NOTE:
All the pictures in this manual are for
explanation purposes only.
The actual shape shall prevail.
The actual shape
of the indoor unit you purchased may be slight
different on front panel and display window.
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5.
6.
7. Display window
Horizontal air flow grille
Vertical air flow louver(inside)
Indoor unit
Names of parts
Units are equipped with a switch to run emergency operation mode. It can be accessed by
opening the front panel. This switch is used for manual operation in case the remote controller
fails to work or maintenance necessary.
Manual operation
Operating temperature
Mode
Temperature
Room tem perature
Outdoor temperature
1. Optimum performance will be achieved within these operating temperatures.If air
conditioner is used outside of the above conditions, cer tain safety protection features
might come into operati on and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is hi gh(ov er
80%) , condensed water may drip out of the unit. Please sets the vertical air flow louver to
its maximum angle (vertically to the floor), and set HIGH fan mode.
Sugge
st ion: For the unit adopts an Electric Heater, when the outside ambient temperature
is below 0 C (32 F), we strongly recom mend you to keep the machine plugged in order to
guarantee it running smoothly.
O O
NOTE:
Cooling operation
Heating operation Drying operation
-15 50 5 122
For the models with low
temperature cooling system
0 50
32 122
-1 5 30
5 86
0 50
32 122
17 C~32 C
(62 F~90 F)
O O
O O
0 C~30 C
(32 F~86 F)
O O
O O
10 C~32 C
(50 F~90 F)
O O
O O
Open and lift the front panel up to an angle
until it remains fixed with a clicking sound.
One press of the manual control switch will
lead to the forced AUTO operation. If press
the switch twice within five seconds, t he unit
wil l operate under forced COOL operation.
Close the panel firmly to its original
position.
This switch is used for testing purposes
only. Please do not use it unless necessary.
To restore the remote contr
oller operation,
use the remote controller directly.
C A U T I O N:
1
3
2
+
+
NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
Display window
Display window
Digi tal dis play:
Displays the temperature settings when the
air conditioner is operational.
Displays the room temperature in FAN mode.
Displays the self-diagnosti c codes.
Displays for t hree seconds when Timer
ON, Fresh, Swing, Turbo or Silence feature is
activated.
Displays for t hree seconds when Timer
OFF is set.
Displays for t hree seconds when Fresh,
Swing, Turbo or Silence feature is cancelled.
Displays under defrosting operation.
Displays when anti-cold air feature is
acti
vated under heating mode.
Displays during self clean operation(if
applicable).
Displays under 8 C heating operation(if
applicable).
O
,
,
,
,
,
,
,
,
,
,
,
,
,
,
Energy saving display(optional):
WIFI control display(optional):
Displays when the energy saving
feature is activated.(Not available
when the unit does not have energy
saving mode.)
Displays when the WIFI control
feature is activated.(Not available
when the unit does not have this
function.)
According to the operation mode, the
indicator displays different colour:
Under Cool or Dry mode, it displays as cool colour.
Under Heat mode, it displays as warm colour.
,, ,,
(Optional)
NOTE:
A guide on using the infrared remote
is included in this literature package.

INVENTOR AR1MVI-09WFR Specifications

General

Brand	INVENTOR
Model	AR1MVI-09WFR
Category	Remote Control
Language	English