To Next PageTo Next Page
Need help?Do you have a question about the INVENTOR V7DI-12WiFiR/U7RS-12 and is the answer not in the manual?
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| WiFi Connectivity | Yes |
| Noise Level | 24 dB(A) (Indoor Unit, Low Speed) |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Type | Split System Air Conditioner |
| Heating Capacity | 13000 BTU/h |
Guidelines for safe installation of the wire controller, including wiring precautions.
Provides the physical dimensions of the wired remote controller.
Instructions on how to detach the top cover of the wired controller.
Details on how to secure the back plate of the wired controller to surfaces.
Steps for correctly installing the battery in the wired controller.
Guides on connecting the wired controller to the indoor unit.
Illustrates the wiring connections for the wired controller.
Instructions for reassembling the wired controller after installation.
Explains the symbols for different operating modes on the LCD.
Describes the icons indicating fan speed settings.
Details on how temperature is shown on the LCD.
Explains the symbol for the lock function.
Shows how Celsius and Fahrenheit units are displayed.
Indicates the main and secondary unit status on the display.
Describes the icon for the turbo function.
Explains the display for room temperature.
Shows the indicator for the Follow Me feature.
Indicates the left-right swing feature on the LCD.
Details the clock display on the LCD.
Explains the timer display on the LCD.
Identifies the power button.
Identifies the mode selection button.
Identifies the Day Off/Delete button.
Identifies the adjustment button.
Identifies the confirmation button.
Identifies the timer setting button.
Identifies the fan speed control button.
Identifies the back navigation button.
Identifies the swing function button.
Identifies the function button.
Identifies the copy function button.
Guides on setting the current date and time on the controller.
Instructions on how to turn the unit on and off.
Steps to select the cooling, heating, or fan mode.
How to adjust the desired room temperature.
Instructions for selecting fan speed levels.
How to enable or disable audible feedback for button presses.
Procedure to activate and deactivate the child lock feature.
Operation for units with automatic left and right swing.
Operation for units without automatic left/right swing.
How to activate and use the turbo mode for rapid cooling/heating.
Explains the 'Follow Me' feature for temperature sensing.
Step-by-step guide to setting the timer for automatic operation.
Steps to initiate weekly timer setup.
How to select specific days of the week for timer settings.
Setting the activation time for the first weekly timer event.
Setting the deactivation time for the first weekly timer event.
How to activate and manage the weekly timer function.
Instructions to turn off the weekly timer.
How to temporarily stop the unit while the weekly timer is active.
Procedure to set a day off for holidays within the weekly timer.
How to delay the start or stop time of timer functions.
How to copy timer settings from one day to another.
Steps to initiate the second weekly timer setup.
Selecting days of the week for the second weekly timer.
Setting the activation time for the first event in Weekly Timer 2.
Adjusting the time for timer events.
Selecting the operating mode (e.g., Cool, Heat) for timer events.
Setting the desired temperature for timer events.
Selecting fan speed for timer events.
How to activate and manage the second weekly timer.
Instructions to cancel timer operations.
Procedure to set a day off for holidays in Weekly Timer 2.
How to copy timer settings from one day to another in Weekly Timer 2.
Steps to remove a specific timer setting for a day.
Adjusting temperature compensation for the Follow Me feature.
Configuring the acceptable temperature range.
Enabling or disabling remote control signals.
Instructions to reset the controller to its default factory settings.
