Need help?Do you have a question about the INVENTOR NFI-30 and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Power Consumption | 2.8 kW |
| Air Flow | 1200 m3/h |
| Cooling Capacity | 30000 BTU/h |
Specifies the type of air conditioning unit.
Details electrical power specifications and safety.
Outlines essential safety precautions for operation.
Specifies operational temperature limits for cooling and heating.
Diagrams showing the components of the NFI-50/NFO-50 model.
Diagrams showing the components of the NFI-30/NFO-30 model.
Explains the functions displayed on the VFD screen.
Details the names and functions of various buttons on the control panel.
Describes the forced cooling and heating test modes.
Explains the compressor's safety restart and stop functions.
Details how to shield the display screen for protection.
Introduces the primary buttons and their basic operations.
Explains the operation of TIMER ON and TIMER OFF buttons.
Details the SLEEP and LIGHT button operations.
Guides on adjusting the air louvers for optimal airflow.
Instructions for safely cleaning the air conditioner's main body.
Procedure for removing and cleaning the air intake filter.
Details electrical connection requirements and diagrams.
Steps for connecting the refrigerant pipes between units.
Guidelines for using copper pipes purchased locally.
Criteria for selecting an appropriate location for the indoor unit.
Procedure for connecting refrigerant and drainage pipes.
Guidelines for proper drainage pipe installation.
Factors to consider when selecting a site for the outdoor unit.
Detailed steps for connecting refrigerant pipes with proper tightening.
Procedure for venting air using a vacuum pump.
Instructions for connecting the outdoor unit's electrical wiring.
Procedure for testing the unit after installation completion.
To Next Page