Need help?Do you have a question about the INVENTOR NFO-50 and is the answer not in the manual?
General| Brand | INVENTOR |
|---|---|
| Model | NFO-50 |
| Category | Air Conditioner |
| Language | English |
Details electrical capacity, grounding, wiring, and circuit protection.
Emphasizes reading the manual and using the unit only for described purposes.
Specifies operating temperature limits for cooling and heating modes.
Illustrates and labels components of the indoor and outdoor units.
Displays operating status, settings, and error codes.
Explains functions of SWING, FUN SPEED, MODE, ON/OFF, SET TEMP, and TIMER keys.
Describes forced cooling/heating modes when no signal is received.
Explains the 3-minute restart delay for the compressor.
Details how to shield/unshield the remote control screen.
Introduces remote control usage, signal range, and basic button functions.
Explains SWING, TEMP, MODE, FAN, and ON/OFF button functions.
Explains SLEEP, LIGHT, TIMER ON/OFF functions.
Explains the auto mode operation and default temperatures.
Describes how the cooling mode works and temperature settings.
Explains the heating mode operation and temperature settings.
Details the dry mode operation and temperature settings.
Explains how to set the timer for automatic on/off operation.
Describes sleep mode for energy saving and comfort.
Provides step-by-step instructions for installing batteries in the remote control.
Instructions for adjusting horizontal louvers using the SWING function.
Describes manual adjustment of vertical louvers for airflow direction.
Instructions for cleaning the air conditioner's cabinet and exterior.
Steps for removing, cleaning, and re-installing the air filter.
Covers electrical connection requirements, wire specifications, and diagrams.
Details how to connect refrigerant pipes, including bending and sealing.
Guidelines for selecting an appropriate location for the indoor unit.
Covers pipe connections, drainage setup, and sealing.
Criteria for selecting a suitable place for the outdoor unit.
Details on pipe connection, tightening, and vacuuming.
Instructions for charging refrigerant and checking for leaks.
Steps for connecting electrical wiring to the outdoor unit.
Instructions for performing a test run after installation.
To Next Page