What to do if INVENTOR Air conditioning systems Air Conditioner doesn't cool or heat?
If your INVENTOR Air Conditioner isn't cooling or heating at all, here are a few things to check: * The air inlet or outlet of the outdoor unit might be blocked; clear the block first, then begin to operate. * The unit may be in a three-minute protection mode; wait for a while. * The temperature setting might be inappropriate; set the temperature properly.
What to do when INVENTOR Air Conditioner activates compressor protection?
Turn off the INVENTOR Air Conditioner, clean the air filter, and then restart the unit. If this does not resolve the issue, no answer.
Why my INVENTOR Air Conditioner does not turn on?
Your INVENTOR Air Conditioner might not be turning on due to several reasons: * There could be a power failure; in this case, wait for the power to be restored. * The power supply might be disconnected; switch on the main power switch. * The power fuse might be blown; change the fuse. * The timer might be set; wait or cancel the timer setting. * The batteries of the remote control might be exhausted; replace the batteries.
How to improve cooling or heating in INVENTOR Air conditioning systems?
If your INVENTOR Air Conditioner isn't cooling or heating well, consider these potential causes and solutions: * The temperature setting may be too high or too low; set a more comfortable temperature. * The air filter may be clogged with dust; clean the filter. * The air inlet or outlet of the outdoor unit may be blocked; clear the blockage. * Doors or windows may be open; close them.
Information regarding disposal for European countries.
Definitions of warning and caution symbols indicating potential hazards.
Essential safety measures for operating the air conditioner correctly and safely.
Safety advice on handling the unit, filters, and during cleaning and usage.
Guidelines for safe operation, usage, cleaning, and service of the unit.
Details on the components of the indoor and outdoor units.
Explanation of the controls, indicators, and operation modes on the unit.
Instructions for adjusting fan speed, temperature, and timer settings.
Details on auxiliary functions like Sleep, Turbo, Timer, and Lock modes.
Instructions for adjusting horizontal and vertical airflow directions.
Guidance on normal operational events like compressor protection and white mist.
Explanation of heating mode operation and factors affecting performance.
Information on auto-restart function and handling lightning interference.
Steps and precautions for cleaning the indoor unit and remote controller.
Instructions for cleaning the air outlet and louvers.
Procedure for removing, cleaning, and reinstalling the front panel and air filter.
Guidance for long-term idleness and aftersales support.
List of common problems with possible causes and solutions.
Explanation of error codes displayed on the unit and recommended actions.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Type | Split System |
| Functions | Cooling, Heating, Dehumidification |
| Refrigerant | R410A |
| Operating Temperature | Heating: -15-24°C |
| Weight (Indoor Unit) | 7 kg |
| Features | Wi-Fi Control, Self-Cleaning, Sleep Mode |
To Next Page