INVENTOR Air conditioning systems User Manual

AUXILIARY
FUNCTION
TEST RUN
LOCK
ON/OFF MODE FAN SPEED
ADJUST
1
2
TIMER ON TIMER OFF
3
4 5
7
OPERATING INSTRUCTIONS
Unit Control Panel
Indicators
Auto operation display
Cooling operation display
Dry operation display
Heating operation display
Fan operation display
Swing operation display
Sleep operation display
Turbo operation display
On timer operation display
Off timer operation display
Lock operation display
Room Temp/Set Temp
/Set Timer display
Operation buttons
Auto: Automatically choose the operation mode by sensing the difference between
the actual ambient room temperature and the set temperature on the remote controller.
The fan speed is automatically controlled.
Cool: Enables you to enjoy the cooling effect at you preferred setting temperature
OO
(Temperature range:17 C~30 C).
Dry: Enables you to set the desired temperature at low fan speed which provides you
OO
with the dehumidifying surroundings (Temperature range:17 C~30 C). In Dry mode,
you can not select Fan speed.
Heat: Permits heating operation(For cooling & heating models only)
OO
(Temperature setting range:17 C~30 C)
Fan only: Permits fan operation without cooling or heating. In this case, however,
the setting temperature is not displayed and you can not adjust the set temperature.
MODE button: Press this button to select the appropriate operating mode. Each time the
button is pressed, the operation mode is shifted in the direction of the arrow:
AUTO COOL DRY HEAT(for cooling & heating models only) FAN ONLY
Mode indicators illuminates under the different mode settings.
1
TIMER ON
TIMER OFF
Fan speed display
ON/OFF button: Operation starts when this button is pressed and stops when you
press the button again.
2

INVENTOR Air conditioning systems Specifications

General

Brand	INVENTOR
Model	Air conditioning systems
Category	Air Conditioner
Language	English