EasyManuals Logo

INVENTOR YB1FA User Manual

INVENTOR YB1FA
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Wireless Remote Controller YB1FA
5
heating quickly so that the ambient temperature will approach the preset temperature as soon as
possible.
About lock
Press + and - buttons simultaneously to lock or unlock the keyboard. If the wireless remote
controller is locked, the icon
will be displayed on it, in which case, any press will get no response
but with the mark blinking for three times. If the keyboard is unlocked, the mark will disappear.
About SWING UP/DOWN
Press the Swing Up/Down button for more than 2 seconds and then the louvre will swing up
and down. After releasing the button, the louvre will stop swinging and keep the current status.
When the louvre starts swinging, by pressing the Swing Up/Down button 2 seconds
later, the louvre will stop swinging directly; while, by pressing the Swing Up/Down button within 2
seconds, the louver will keep swinging.
About Change over switch between Fahrenheit and Centigrade
Under the OFF state of the unit, press MODE and - buttons simultaneously to switch between
°C and °F.
4 Replacement of batteries
1
Slightly press the place with along the arrowhead direction and push the back cover of
the wireless remote controller.
2
Take out the used batteries.
3
Insert two new AAA 1.5V dry cell batteries and pay attention to their polarity.
4
Put back the cover of the wireless remote controller.
2
3
4
1
Notes!
When changing the batteries, do not use the used or different-type batteries, otherwise, it
would cause some malfunction to the wireless remote controller.
If the wireless remote controller will not be used for a long time, please take them out, and
don’t let the battery liquid damage the wireless remote controller.
The operation should be within the signal receiving range.
It should be placed 1m away from the TV set or stereo sound sets.
If the wireless remote controller can not operate normally, please take batteries out for 30s.
If the anomaly persists, please change them.
The battery must be removed from the appliance before it is scrapped.The batteries is to be
disposed of safely.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the INVENTOR YB1FA and is the answer not in the manual?

INVENTOR YB1FA Specifications

General IconGeneral
BrandINVENTOR
ModelYB1FA
CategoryRemote Control
LanguageEnglish

Related product manuals