inventum BC26 - Cleaning & Care; Technical Data

• Clean your blood pressure monitor carefully only
with a slightly moistened cloth.
• Do not use detergents or solvents.
• On no account must you immerse the computer into
water, otherwise liquid can enter it and cause
damage.
• When storing the device, make sure that no heavy
objects are placed on top of it. Remove the
batteries. The cuff should not have any sharp kinks.
• Always store the blood pressure monitor in the
storage case.
Model BC26
Method of measurement Oscillometric, non-invasive blood
pressure measurement on the
upper arm
Range of measurement pressure 0-280 mmHg, systolic:
20-280 mmHg, diastolic: 20-280
mmHg, pulse: 40-180 beats/minute
Accuracy of the pressure systolic ± 3 mmHg /diastolic:
reading ± 3 mmHg / pulse: ± 5% of the
displayed value
35
13 | TECHNICAL DATA
12 | CLEANING & CARE
Measuring uncertainty max. permissible standard
deviation according to clinical
testing: systolic 8 mmHg/ diastolic
8 mmHg
Sets of memory 2 x 50 memory places
Unit dimension L 156 x W 105 x H 74,5 mm
Unit weight Approx. 330 g.
Cuff size Wrist circumference 24-36 cm
Operating temperature +10°C to +40°C, ≤ 85% RH
Storage temperature -10°C to +60°C, ≤ 95% RH
Power supply 4 x 1,5 V AA (alkaline, type LR6).
Accessories With storage pouch, instruction
manual, 4 x AA batteries.
Classication Application part type BF
Key to symbols Application part type BF
Important! Read the operating
instructions!
These specications are subject to change without notice for purpose
of improvement.