What to do if my inventum IKI7840 does not start?
If your Inventum Hob doesn't start, first, ensure the mains plug is correctly connected to the socket and that the mains supply is switched on. If that's not the issue, check if the appliance is locked and unlock it. Finally, make sure the touch buttons are clean, as dirt can prevent them from working properly.
Why does my inventum IKI7840 show breakdown code E2 / EH?
If the Inventum Hob displays breakdown code E2 / EH, it means the appliance has overheated. Allow the appliance to cool down completely before using it again.
Why does my inventum IKI7840 show U on the control panel?
If the operation indicator on the Inventum Hob control panel shows U, it could be due to two reasons: either there is no pan on the cooking zone, or the pan you are using is not suitable for an induction appliance. Make sure to place a suitable pan on the cooking zone.
What to do if my Inventum Hob shows L on the control panel?
If the operation indicator on the Inventum Hob control panel shows L, it means that the appliance is locked. You should unlock the appliance.
What does breakdown code Er03 mean on my inventum IKI7840 Hob?
If your Inventum Hob displays breakdown code Er03, it indicates that the touch buttons are covered. Clear any blockage from the touch buttons.
Why does my Inventum Hob show breakdown code E3?
If your Inventum Hob displays breakdown code E3, it means the pan you are using is not suitable for induction cooking. Use a pan designed for induction appliances.
Why does my inventum IKI7840 cooking zone switch off automatically showing H?
If a cooking zone on your Inventum Hob switches off automatically and the operation indicator shows H, it means the maximum cooking time has been reached. To resolve this, start the appliance and select a cooking zone.
What does breakdown code E5 mean on my inventum IKI7840?
If your Inventum Hob displays breakdown code E5, it indicates a defect in the mains supply voltage. Check the voltage of your mains supply.
What does breakdown code E6 mean on my Inventum Hob?
If your Inventum Hob displays breakdown code E6, this indicates a defect in the frequency of the mains supply. You should check the frequency of the mains supply.
What does breakdown code E8 mean on my inventum IKI7840 Hob?
If your Inventum Hob displays breakdown code E8, it means the ventilation opening of the fan is blocked. Remove the blockage to allow proper ventilation.
General| Type | Induction |
|---|---|
| Number of zones | 4 |
| Power levels | 9 |
| Timer | Yes |
| Child lock | Yes |
| Residual heat indicator | Yes |
| Power consumption | 7.4 kW |
To Next Page
