To Next PageTo Next PageWhy won't my Inventum hob start?
Your Inventum hob might not start due to several reasons: * There could be no mains supply. Ensure the mains plug is correctly connected and the mains supply is on. * The child lock might be activated. Deactivate the child lock. * The touch buttons could be covered with dirt. Clean the appliance.
What to do if inventum IKI9045FLOW Hob cooking zone switches off automatically?
If a cooking zone on your Inventum hob switches off automatically and the operation indicator shows 'H', it could be due to these reasons: * The maximum cooking time has been reached. Start the appliance and select a cooking zone again. * The touch buttons are covered. Remove the blockage. * There is an empty pan on the cooking zone, and the bottom is overheated. Remove the pan from the cooking zone.
Why does my inventum IKI9045FLOW show U?
The 'U' indicator on your Inventum hob means either: * There is no pan on the cooking zone. Put a pan on the cooking zone. * The pan is not suitable for induction cooking. Use a pan that is suitable for an induction appliance.
What does E6 mean on my Inventum hob?
The 'E6' error code on your Inventum hob indicates a defect in the mains supply. Check the voltage and frequency of the mains supply.
How to fix G error on Inventum cooker hood?
If the display on the control panel of your Inventum cooker hood shows 'G', it means the grease filter is dirty. Clean the grease filter and reset the alarm.
What does E8 mean on inventum IKI9045FLOW Hob?
The 'E8' error code on your Inventum hob indicates that the ventilation opening of the fan is blocked. Remove the blockage.
What does S mean on my Inventum cooker hood display?
If your Inventum cooker hood display shows 'S', the charcoal filter is worn. Replace the charcoal filter and reset the alarm.
What does E3 mean on my inventum IKI9045FLOW?
The 'E3' indicator on your Inventum hob means that the pan is not suitable for induction cooking. Use a pan that is suitable for an induction appliance.
Why is my Inventum cooker hood flashing 8?
If the display on the control panel of your Inventum cooker hood is flashing '8', there is too much condensation or liquid present in the appliance. Drain the liquid and reset the alarm.
What does L mean on my Inventum hob?
The 'L' indicator on your Inventum hob means the child lock is activated. Deactivate the child lock.
General| Type | Induction |
|---|---|
| Number of Cooking Zones | 4 |
| Power | 7400 W |
| Control Type | Touch |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Timer | Yes |
| Boost Function | Yes |
| Residual Heat Indicator | Yes |
| Auto Shut-off | Yes |
| Safety Features | Child Lock, Overheat Protection |
| Width | 900 mm |
| Material | Glass |
