Need help?Do you have a question about the INVT GD20-0R7G-S2-EU and is the answer not in the manual?
Provides general safety guidelines for operating and handling the VFD.
Safety precautions for handling and installing the VFD.
Safety guidelines for VFD commissioning and initial operation.
Safety precautions for VFD maintenance and replacing components.
Key checks and confirmations before initial use and installation.
Outlines essential steps for basic commissioning of the VFD.
Details technical specifications of the VFD's power input and voltage.
Lists detailed rated specifications for different VFD models.
Covers the physical aspects of VFD installation.
Specifies environmental conditions for VFD installation (temperature, humidity).
Provides wiring diagrams for the main circuit of the VFD.
Illustrates the main circuit connection diagrams for various VFD configurations.
Shows terminal layouts for the main circuit of different VFD models.
Step-by-step instructions for wiring the main circuit terminals.
Wiring diagrams for the control circuit of the VFD.
Shows terminal layouts for the control circuit of VFDs.
Explains the Safe Torque Off (STO) function and its reference standards.
Logic table detailing STO input states and corresponding faults.
Procedure for self-inspecting STO installation effectiveness.
Protecting the VFD and input cable from short circuits and overload.
Protecting the motor and motor cables from short circuits.
General operation of the VFD using the keypad.
Step-by-step guide to modifying VFD function codes.
Instructions for setting a password for VFD protection.
Core parameters, including speed control modes.
Parameters related to VFD start-up and stop control.
Parameters for configuring motor settings.
Parameters specifically for vector control mode.
Parameters related to SVPWM control and V/F curves.
Configuration of VFD input terminals and signals.
Configuration of VFD output terminals and relays.
Parameters for configuring the PID control loop.
Parameters for PLC and step control.
Parameters for various VFD protection functions.
Communication setup and configuration.
General steps for resolving VFD faults and alarms.
Table detailing fault codes, causes, and solutions.
To Next Page
General