Need help?Do you have a question about the INVT GD20-0R7G-S2 and is the answer not in the manual?
General| Power | 0.75kW |
|---|---|
| Protection Level | IP20 |
| Enclosure Rating | IP20 |
| Control Method | V/F control |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overload, Short circuit |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +65°C |
| Cooling Method | Air cooling |
Covers safety definitions, warning symbols, and general safety guidelines.
Details safety measures for delivery, installation, commissioning, and running.
Outlines safety procedures for maintenance, component replacement, and scrapping.
Covers fundamental parameters like speed control mode, run command, and frequency limits.
Parameters related to starting, stopping, braking, and acceleration/deceleration modes.
Defines parameters for motor identification, including rated power, speed, and resistance.
Parameters specific to vector control mode, such as PI gains and torque settings.
Parameters for SVPWM control, including V/F curves, torque boost, and voltage limits.
Configuration for digital and analog input terminals, including signal selection and polarity.
Settings for relay and analog outputs, including signal selection and delay times.
Parameters for keypad functions, password protection, and display settings.
Advanced functions like jogging, jumping frequency, traverse, and counting.
Parameters for configuring PID control loops, including reference and feedback sources.
Settings for simple PLC programming and multi-step speed control operations.
To Next Page