Need help?Do you have a question about the INVT GD20-090G-4 and is the answer not in the manual?
General| Model | GD20-090G-4 |
|---|---|
| Protection Level | IP20 |
| Input Voltage | 380V AC |
| Control Method | Vector Control |
| Rated Power | 45kW |
| Input Voltage Type | 3-phase AC |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit |
Defines hazard levels (Danger, Warning, Note) and requirements for qualified personnel.
Explains the meaning and instruction for each warning symbol used in the manual.
Provides essential rules for safe operation, wiring, and maintenance of the inverter.
Safety measures for handling, moving, and physically installing the inverter.
Precautions for powering up, operating, and managing emergency stops.
Safety protocols for servicing and replacing internal inverter components.
Steps for unpacking, inspecting, and confirming the inverter before use.
Verification steps required after the inverter has been physically installed.
Initial setup and testing procedures before the inverter is put into full operation.
Covers environmental conditions, mounting, and installation direction.
Details for connecting main circuit, control circuit, and I/O signals.
Methods for protecting the inverter and cables from electrical faults.
Explains the function, types, and components of the inverter's control keypad.
Instructions on navigating menus, modifying parameters, and using keypad functions.
Parameters for password, parameter copy, keypad functions, and display settings.
Settings for various protection functions like phase loss, overvoltage, and overload.
Configuration for Modbus communication, including address, baud rate, and data format.
Guidance on identifying, troubleshooting, and resetting inverter faults.
To Next Page