Need help?Do you have a question about the INVT GD20-030G-4 and is the answer not in the manual?
Defines terms like Danger, Warning, Note, and Qualified electricians.
Illustrates and explains warning symbols used in the manual.
Provides essential guidelines for operating the inverter safely.
Steps for initial setup, including unpacking and application confirmation.
Detailed technical specifications for the inverter series.
Table listing electrical ratings such as voltage, current, and power.
Guidance on the physical placement and environment for the inverter.
Specifies conditions for installation site, temperature, humidity, and altitude.
Instructions for connecting main circuit and control circuit wiring.
Diagrams showing how to connect power and motor circuits.
Illustrations of the main circuit terminal connections.
Step-by-step guide for wiring the main circuit terminals.
Diagram illustrating the control circuit wiring connections.
Details and specifications for control circuit terminals.
Measures for protecting the inverter and cables from short circuits.
Overview of the inverter's keypad for control and parameter adjustment.
Describes different display states of the keypad (stopping, running, fault).
Details on how to operate the inverter using the keypad.
Step-by-step guide to changing function code parameters.
Parameters related to basic functions like speed control and run channels.
Parameters for controlling the inverter's start-up and stop sequences.
Parameters for configuring motor characteristics and settings.
Parameters specific to the vector control mode for enhanced performance.
Parameters for SVPWM control, including V/F curve settings.
Settings for configuring the inverter's digital and analog input terminals.
Parameters for configuring the inverter's PID control loop.
Parameters for programming simple PLC logic and multi-step speed sequences.
Parameters for various protection functions like phase loss and overvoltage.
Parameters for configuring communication protocols like Modbus.
Recommended maintenance schedule and checks for the inverter.
Guidance on identifying, troubleshooting, and resolving inverter faults.
Detailed table of fault codes, possible causes, and solutions.
Explains Modbus command codes and data formats for RTU and ASCII.
To Next Page
General