Need help?Do you have a question about the INVT GD20-037G-4 and is the answer not in the manual?
Introduction to the Goodrive20 Series inverter.
Defines safety terms and provides essential safety guidelines for inverter operation.
Guidelines for physical installation, including environmental conditions.
Instructions for correctly wiring the main circuit and control circuits.
Covers fundamental parameters like speed control mode and run command.
Parameters for controlling the inverter's start-up and stopping behavior.
Parameters for configuring motor characteristics for optimal performance.
Parameters for advanced vector control mode tuning.
Parameters related to SVPWM control, including V/F curves.
Configuration for digital and analog input terminals.
Configuration for digital and analog output terminals.
Settings related to user interface, keypad, and parameter management.
Advanced features and functions for specialized applications.
Parameters for configuring the Proportional-Integral-Derivative (PID) control loop.
Selects the source for the PID control reference value.
Selects the source for the PID control feedback signal.
Features for implementing simple PLC logic and multi-step speed operations.
Defines the operating modes for the Simple PLC function.
Configuration of various protection functions for the inverter.
Enables and configures protection against input/output phase loss.
Enables protection against overvoltage stall conditions.
Configuration settings for serial communication interfaces.
Steps to identify, diagnose, and resolve inverter faults.
To Next Page
General