EasyManua.ls Logo

INVT GD20-022G-4-EU User Manual

INVT GD20-022G-4-EU
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the INVT GD20-022G-4-EU and is the answer not in the manual?

INVT GD20-022G-4-EU Specifications

General IconGeneral
ModelGD20-022G-4-EU
Rated Power22kW
Rated Output Current45A
Cooling MethodForced air cooling
Enclosure RatingIP20
Input Frequency50/60Hz
Overload Capacity150% for 60 seconds
Control MethodV/F control, sensorless vector control
Protection FeaturesOvercurrent, Overvoltage, Undervoltage, Overheat, Overload, Short circuit
Communication InterfaceModbus RTU

Summary

Safety Precautions

Safety Guide

Provides essential guidelines and precautions for operating and handling the VFD safely.

Product Overview

Product Specifications

Lists the input voltage and allowable voltage fluctuation specifications for the VFD.

Rated Specifications

Lists rated output power, input/output current, and STO function for different models.

Installation Guide

Mechanical Installation

Covers the mechanical aspects of installing the VFD, including environment, direction, and mode.

Standard Wiring

Details main circuit and control circuit wiring, including terminal figures and diagrams.

Overview of STO Function

Introduces the Safe Torque Off (STO) function, its logic, and delay descriptions.

Keypad Operation Procedure

Keypad Operation

Details operations like modifying function codes, setting passwords, and watching VFD states.

Function Parameters

P01 Group Start-up and Stop Control

Covers parameters related to VFD start-up, stop modes, and braking functions.

P02 Group Motor 1

Lists parameters for configuring motor 1, including rated power, frequency, and voltage.

P03 Group Vector Control

Details parameters for vector control mode, including speed loop and current loop settings.

P05 Group Input Terminals

Covers parameters for configuring digital and analog input terminals and their functions.

P06 Group Output Terminals

Details parameters for configuring relay and analog output terminals and their functions.

P09 Group PID Control

Details parameters for PID control, including reference source, feedback, and PID tuning.

P11 Group Protective Parameters

Covers various protection parameters like phase loss, overvoltage, and current limit.

P14 Group Serial Communication

Explains parameters for serial communication, including Modbus, baud rate, and data format.

Fault Tracking

Fault Solution

Guides on troubleshooting common alarms and faults, including how to reset and identify causes.

Communication Protocol

Common Communication Fault

Discusses common communication issues like no response or abnormal faults and their possible causes.

Related product manuals