12 13
LOCK OPERATION USING IR2 KEY
Position IR2 Key against lock, push button and wait for “beep”
before removing key. Lock and unlock cabinets several times to
ensure proper operation.
IR2 Key must be charged
and activated. See IR2 Key
instruction guide.
Hold until you get a
confirmation “beep.”
Note: If double “buzz,” an
error has occurred. Unlock,
ensure cabinet is fully
closed and try again.
Locked
“BEEP”
LOCK STATUS INDICATORS
Locked
Unlocked
Error (not fully locked)
Note: Unlock lock. Confirm
no obstructions. Fully close
cabinet and try again.
To Next Page
Loading...
