Need help?Do you have a question about the inVue PL401 and is the answer not in the manual?
Details specifications for the Showcase Lock, including material compatibility and panel thickness.
Lists all items included in the Showcase Lock system package.
Outlines the necessary tools for installing the Showcase Lock.
Guidance on placing the lock body on the swing-out end of the panel door.
Align template with glass, mark drill holes and routed pocket.
Route pocket to 12.7 mm depth and drill 2 mm screw holes.
Secure base plate with screws, ensuring flush fit with cabinet surface.
Wipe the glass panel with an alcohol wipe and allow it to dry.
Slide lock body onto the glass panel and into the base plate.
Hold lock body, remove numbered tabs, and press against glass.
Confirm proper function by testing lock/unlock with the IR2 Key.
Use IR2 Key to lock/unlock, wait for confirmation beep.
Visual cue indicating the lock is in the unlocked state.
Visual cue indicating the lock is in the locked state.
Visual cue indicating an error or incomplete lock engagement.
To Next Page
General
