25
8. As the Firmware Upgrade proceeds, a
status message will appear in the Status
Messages panel, and the progress toward
completion is shown on the Progress bar.
9. After the upgrade has completed, a screen
appears to inform you that the procedure
was successful. Click Finish to close the
Firmware Upgrade Utility.
10. After a successful completion, the GCS1932/1934 will exit the Firmware
Upgrade Mode and resets itself.
Firmware Upgrade Fail
If the Upgrade Succeeded screen does not appear, this means that the upgrade failed to
complete successfully. If this occurs, repeat the upgrade procedure from the beginning (see
Before Starting Firmware Upgrade).
To Next Page
Loading...
