Need help?Do you have a question about the IOGear MiniView Ultra+ GCS1758 and is the answer not in the manual?
Lists the main features such as dual interface support, multi-platform compatibility, audio support, security, hot-plugging, and video quality.
Outlines precautions before installation, such as unplugging non-hot-pluggable computers and grounding devices.
Guides on setting up a single stage installation, starting with connecting console peripherals and computer cables.
Explains the support for hot-plugging components and the procedures for CPU and console ports.
Describes how to select a specific computer using its Port ID via Hotkey Mode.
Introduces the On Screen Display (OSD) for computer control and switching, including the Main Menu and authorization system.
Describes how to dismiss, logout, and move through lists within the OSD using various keys and clicks.
Administrator-only function for configuring and controlling overall OSD operation.
Enables automatic switching among available computers for monitoring activity, with pause and stop options.
Introduces the utility for upgrading KVM switch firmware and details preparation steps like downloading and connecting.
Guides on running the utility, agreeing to the license, and navigating the welcome screen.
Explains device identification, version checking, and listing of upgradeable devices.
Describes the dialog for version comparison and the progress messages during the upgrade.
Displays the screen confirming a successful firmware upgrade and instructions to close the utility.
Identifies scenarios requiring firmware upgrade recovery, such as deciding not to proceed or upgrade failure.
Provides a step-by-step guide to perform firmware upgrade recovery, including switch manipulation and using the upgrade cable.
Addresses common problems like erratic behavior, unresponsive peripherals, and KVM switch resets with possible causes and actions.
To Next Page
General
