5. After you have made your device selection(s),
Click Next to perform the upgrade. If you enabled
Check Firmware Version
, the Utility compares the
device’s firmware level with that of the upgrade
files. If it finds that the device’s version is higher
than the up grade version, it brings up a dialog box
informing you of the situation and gives you the
option to Continue or Cancel.
If you didn’t enable
Check Firmware Version
, the
Utility installs the upgrade files without checking
whether they are a higher level, or not. As the
Upgrade proceeds status messages appear in
41
Firmware Upgrade Utility
To Next Page
Loading...
Need help?
General
