18 19
Alternate Port Switching Keys
The port switching keys can be changed from
tapping Scroll Lock key twice, to tapping Ctrl
key twice.
If you have a MAC keyboard (or a keyboard that
does not have Scroll Lock key), change the port
switching keys by doing the following:
1. Invoke Hotkey Mode
2. Press and release T
The port switching key will now be the Ctrl key.
To switch between computers, simply tap the
Ctrl key twice: [Ctrl], [Ctrl]
NOTE: This procedure is a toggle between the
two methods. To revert back to the original port
switching keys, repeat the above
procedure.
Restore Defaults
To restore the GCS632U to its factory default
settings, do the following:
1. Invoke Hotkey Mode
2. Press and release [R] key.
3. Press [Enter]
To Next Page
Loading...
