12
Switch Mode Command
You can choose how the 4Kx2K 4-Port HD Switch behaves when a new
input source is connected. There are three Switch Modes:
1. Default – The switch behaves normally without automatic switching.
2. Next – Switch priority is placed on the next port that has a new source
device connected to it.
3. Auto – Places priority on a selected port so that when a source is
connected to the selected port, the 4Kx2K 4-Port HD Switch will
automatically switch to it, and the port cannot be changed until the
source device is unplugged or auto switching mode is disabled with the
default command.
4. In addition, the Go To function enables the 4Kx2K 4-Port HD Switch
to switch to the next port with a powered on source device when the
current input source device is powered off.
To Next Page
Loading...
