12
Software Installation
Please always check www.iogear.com for the
latest drivers.
IMPORTANT NOTE:
If your PC already has a version of this
software installed, please be sure to un-install
it before proceeding.
Use Control Panel -> Add or Remove
Programs. Scroll to “Ultrasuite with WiCenter
Basic.” Click “Ultrasuite with WiCenter Basic,”
then click Remove.
Restart your PC after the software has
successfully un-installed.
You may now proceed with the installaion of
new software.
To install the UWB software, insert the included 1.
CD into your computer. The following menu
should appear automatically. If not, select “Run
CD_Start.exe” OR navigate to the CD Rom
drive containing the installation CD and double-
click on CD_Start.exe to bring up the user
menu. Click on Software Installation to begin
the installation process.
If installing on Windows XP, Service Pack 2
(SP2) is required. Verify that this has been
installed before installing the UWB software.
To Next Page
Loading...
Need help?
General
