How to fix poor picture quality on IOGear Matrix Switcher?
If you're experiencing poor picture quality or intermittent video, verify that your video resolution with HDMI input is set to 1080p, 1080i, 720p, 576p, or 480p. Also, ensure the transmission distance is less than 200 feet (LOS). Try to minimize the number of walls or obstructions between the transmitter and receiver for optimal performance.
Why is there no audio from my IOGear Matrix Switcher?
If you are experiencing a lack of audio, there are a few things to check: * Make sure your TV's volume is properly adjusted and not muted. * Verify that the audio volume on your source player is turned up. * Confirm that the bit rate of the audio from your source device is supported by the GWHDMS52MB.
What to do if IR Blaster can’t control Source device with my IOGear Matrix Switcher?
If the IR Blaster isn't controlling your source device, first locate the IR sensor on the source device. Ensure the IR Blaster sensor is positioned close to and directly in front of the source device's IR sensor. If that doesn't work, try changing the IR Blaster frequency to match the source device's requirements.
How to troubleshoot if the power indicator LED doesn’t light up on my IOGear GWHDMS52MB?
Check the power adapters of the Transmitter / Receiver to see if they are properly inserted into a functioning power outlet.
How to fix no audio issue with IOGear GWHDMS52MB Matrix Switcher?
If you're experiencing no audio with your IOGear Matrix Switcher, first check that your TV's volume is properly set and not muted. Also, verify that the audio volume on your source player is turned up. Finally, make sure that the bit rate of the audio from the source device is supported.
What to do if IOGear GWHDMS52MB Matrix Switcher has poor picture quality?
If you're experiencing poor picture quality or intermittent video with your IOGear Matrix Switcher, check that your video resolution with HDMI input from your device is either 1080p, 1080i, 720p, 576p or 480p. Also, ensure that the transmission distance is less than 200 feet (LOS). Finally, consider an installation plan that minimizes the number of barriers (walls, panels, beams) between the transmitter and receiver.
Why IOGear GWHDMS52MB Matrix Switcher IR blaster is not working?
If the IR Blaster is unable to control the source device with your IOGear Matrix Switcher, first, locate the IR sensor on the source device and ensure the IR Blaster sensor is positioned close to and directly in front of it. Also, try changing the IR Blaster frequency to match the source device's requirements.
What to do if the IOGear GWHDMS52MB Matrix Switcher power LED is off?
If the power indicator LED on your IOGear Matrix Switcher doesn't light up, check the power adapters of the Transmitter / Receiver to see if they are properly inserted into a functioning power outlet.
What to do if no video is displayed on my IOGear GWHDMS52MB Matrix Switcher?
If you are not seeing video on your TV screen, there could be a few reasons: * If the POWER LED is flashing green and the OSD is displaying a looping message, ensure the transmitter and receiver are within a 200 feet line of sight. Try moving them closer. * If the POWER LED is solid green and the SOURCE LED is slowly flashing with an OSD message, check that your video resolution and frame rate are supported and within range. Verify the video format compatibility by connecting the source device directly to your TV. Confirm your display resolution is set to 1080p, 1080i, 720p, 576p, or 480p. * If the POWER LED is solid green and the status LED is flashing quickly with an OSD message, make sure the cables are correctly connected between the transmitter and your A/V source devices, and ...
How to fix no 3D video output on IOGear GWHDMS52MB Matrix Switcher?
If you're not getting 3D video output and the OSD displays 'Tx and/or Rx', check the following: * Verify that both TVs (Transmitter and Receiver sides) support 3D video format. If either TV only supports 2D, 3D output may not be supported. * If you want to display 3D video on an HDTV that supports it, turn off the 2D HDTV and press the EDID 2 button while pointing it at the transmitter or receiver. Then, set the source player to 3D video format output. * Check the video output setting of the source player. If it's set to 3D video format, it might cause issues on an HDTV that doesn't support 3D. * If the equipment status doesn't support 3D video, turn off the 2D HDTV and power cycle the 3D HDTV. * If the equipment status doesn't support 3D video, switch the 3D video format to HDM...
Details US FCC compliance, part 15 rules, and RF exposure warnings.
Outlines Canadian IC compliance, notices, radiation exposure statements, and RF exposure information.
Guides on connecting HD audio/video sources and a local display to the Transmitter.
Guides on connecting the Receiver to an HDTV/projector and the IR sensor extender.
Guides on powering on the Transmitter and Receiver and the initial start-up process.
Explains the process of establishing a wireless link between the Transmitter and Receiver.
Describes various methods to select and switch between input sources using the unit or remote.
Instructions on how to put the Transmitter into pairing mode for new receivers.
Instructions on how to put the Receiver into pairing mode for connection.
Describes the automatic pairing process and how the units link after pairing.
Addresses issues where the power LED is not lit or no video is displayed on the screen.
Provides solutions for problems related to poor picture quality or intermittent video signals.
Addresses issues with no audio output or the IR blaster failing to control devices.
General| HDMI in | 4 |
|---|---|
| USB connector type | Mini-USB B |
| Number of HDMI outputs | 2 |
| Connectivity technology | Wireless |
| Component video (YPbPr/YCbCr) in | 1 |
| Type | AV transmitter & receiver |
| Material | Plastic |
| Product color | Black |
| LED indicators | Link, Power |
| IR pass-through | Yes |
| Maximum resolution | 1920 x 1080 pixels |
| Audio output channels | 5.1 channels |
| Supported video modes | 480p, 720p, 1080i, 1080p |
| Maximum transfer distance | 61 m |
| Cables included | Component, HDMI, IR, IR sensor |
| Frequency | 5900 MHz |
| AC input voltage | 100-240 V |
| Operating voltage | 5 V |
| Package weight | 1460 g |
Weight and Dimensions| Weight | 520 g |
|---|---|
| Dimensions (WxDxH) | 241 x 98.6 x 31.8 mm |
To Next Page