iolloi ID-CD01 - Specification

Specificaon
Dimension
220-240 Vac, 50Hz
Rated input voltage
Power range
Type of load
Dimming
Ambient temperature (Ta)
Cables secon
Dimension
Item weight
1-50W @220-240V LED
LED Retrofit | Incandescent-halogen
Rotary
35 °C
0,75 mm²
29.9g
10-100W @220-240V INC, HAL
32.50mm*31.70mm*65.60mm
This cord dimmer has been specially designed for dimmable LED and incandescent lamps with
a capacity of 0 Wa to a maximum of 50 Wa, but is of course also suitable for incandescent
and halogen lamps up to 100 Wa.
• Integrated load failure protecon (LFP)
• For flat and round cables
• Min and max brightness adjustments to avoid flickering
• Terminal design for easy installaon
If the dimmer aer installed has problems like: "cannot dim","flickering"
1.Make sure you have installed the dimmer correctly in the circuits.
2.Make sure your lights bulbs or the drivers wrien: Dimmable, R.C dimming. This Dimmer
is trailing edge dimmer which was developed and supposed to work with trailing edge
dimmable LEDs perfectly.
WHAT IF The Dimmer Does Not Work ?
Certain light sources may not behave according to their power rang when used with a
dimmer. An overload will result in the safety features switching the dimmer off.
We recommend the maximum load per gang is 50 was or 5 lamps(whichever is lower)
Warning!