iolloi ID-CD01 - Installation; Operation

English
Installaon
Operaon
1. Unscrew the closing screws
2. Take out the front cover and the knob
3. Unscrew the cord anchorage
4. Strip the cable to be connected
5. Connect supply cable to the terminals L and N of the electronic board.
6. Connect lamp cable to the terminal idenfified by symbol of the
electronic board.
7. Mount cord anchorage
8. Mount front and back , screwing the screws .
1. ON and OFF
• quick press to on/offff and rotary to dim
2. MIN. and MAX. sengs
• clockwise to increase the brightness • an-clockwise to decrease the brightness
E
E
B
A
C
C
B D E