Iomega StorCenter ix2 User Manual

Stor
Center ix2
Network Storage

Your
Iomega
®
StorCenter ix2 Network Storage provides flexible, high performance data
storage that can be used on a single computer or a network.
Your
StorCenter Network Drive supports two connection options:
 Network
NetworkNetwork
Network—connect the drive to a network to allow multiple users to access the
StorCenter as a local disk drive.
 Ethernet on a single computer
Ethernet on a single computerEthernet on a single computer
Ethernet on a single computer—connect the drive directly to a single computer via
the Ethernet port.

Page
1
of
137
25
-
7
-
2010
http://www.iomega.com/support/manuals/ix
-
series/221
-
0809/en/consolidated/printall.h
...

Iomega StorCenter ix2 Specifications

General

Model	StorCenter ix2
Category	Network Attached Storage (NAS)
Drive Bays	2
Interface	Gigabit Ethernet
RAM	256MB DDR2
Operating System	EMC LifeLine
Compatibility	Windows, Mac, Linux
USB Ports	2 x USB 2.0
RAID Support	RAID 1
File Protocols	AFP, FTP, NFS
Storage Capacity	up to 6TB
Features	DLNA Certified

Summary

StorCenter ix2 Network Storage

Safety Information

Guidelines for safe operation and handling of the StorCenter device.

Connecting the StorCenter device

Initial Setup

Step-by-step instructions for the initial connection and setup.

Initial Configuration

Guides through the device setup wizard for network and user settings.

Using the StorCenter

Connecting to Shared Folders

Explains how to access shared folders using the StorCenter Manager or manually.

Configuring the StorCenter

Covers advanced settings like user management, network, and media server.

Configuring Network Services

Details configuration for Network Settings, Bluetooth, FTP, NFS, SNMP, SMB/CIFS, AFP.

Managing Users

Instructions for creating, modifying, and deleting user accounts.

Managing Shared Folders

Guides on creating, modifying, and deleting shared folders for access.

Erasing the StorCenter device

Setting Disk Protection

Explains array handling, JBOD, and RAID 1 for data protection.

Updating the Firmware

Procedures for downloading and installing firmware updates.

Resetting the StorCenter

Procedure to reset the device to its factory default settings.

Using Remote Access

Steps to enable and configure remote access to your device.

Browsing the StorCenter via the Shared Storage Tab

Security Settings

How to enable and configure security features for the device.

Port Forwarding

Troubleshooting

Drive does not power on

Steps to resolve issues where the device fails to power on.

Drive is not recognized on your system

How to find the drive if StorCenter Manager does not work

Some Computers on the Network Cannot Connect to the StorCenter