To Next PageTo Next Page
Need help?Do you have a question about the Iomega STORCENTER px12-350r and is the answer not in the manual?
General| HDD speed | 7200 RPM |
|---|---|
| RAID levels | 0, 1, 5, 6, 10, JBOD |
| Average latency | 4.17 ms |
| Storage drive size | 3.5 \ |
| Storage drive capacity | 3000 GB |
| Supported file systems | ext2, ext3, FAT32, HFS+, NTFS |
| Storage drive interface | Serial ATA II |
| Total installed storage capacity | 3 TB |
| Maximum supported storage capacity | 36 TB |
| Number of storage drives installed | 1 |
| Number of storage drives supported | 12 |
| Internal memory | 4 GB |
| Internal memory type | DDR2 |
| Tcase | 72.4 °C |
| Bus type | FSB |
| L2 cache | 6 MB |
| Stepping | E0 |
| FSB Parity | No |
| Processor code | SLB9J |
| Processor cores | 2 |
| System bus rate | - GT/s |
| Processor family | Intel® Core™2 Duo |
| Processor socket | LGA 775 (Socket T) |
| Processor codename | Wolfdale |
| Processing Die size | 107 mm² |
| Processor frequency | 3 GHz |
| Processor cache type | L2 |
| Processor lithography | 45 nm |
| Processor manufacturer | Intel |
| Processor package size | 37.5 x 37.5 mm |
| Processor front side bus | 1333 MHz |
| Processor operating modes | 64-bit |
| Thermal Design Power (TDP) | 65 W |
| On-board graphics card model | Not available |
| CPU multiplier (bus/core ratio) | 9 |
| Ethernet LAN | Yes |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 1000 Mbit/s |
| Supported network protocols | CIFS/SMB/Rally (Microsoft), NFS (Linux/UNIX), AFP/Bonjour (Apple), FTP, TFTP, HTTP, HTTPS, WebDAV, Windows DFS |
| Compliance industry standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
| Certification | FCC, CE |
| Processor ARK ID | 33910 |
| Minimum processor | Intel Pentium 300MHz |
| Power requirements | AC: 100-240V, DC: 19V/3.42A |
| Networking features | Gigabit Ethernet |
| Minimum system requirements | IE 7.0+\\r Firefox 3.x+\\r Netscape 8.0+\\r Safari 3+ |
| Compatible operating systems | Windows Server\\r Windows XP Home\\r Windows XP Professional\\r Windows XP Professional x64\\r Windows Server 2003\\r Windows Server 2008\\r Windows Server 2008 R2\\r Mac OS X 10.4+\\r Redhat Enterprise 4-6\\r Ubuntu 7.10 - 10.10\\r OpenSUSE 10.3 - 11.3\\r VMware vSphere 5.0\\r Citrix XenServer |
| Noise level | 56 dB |
| Mean time between failures (MTBF) | 1200000 h |
| Cables included | LAN (RJ-45) |
| USB 2.0 ports quantity | 3 |
| Ethernet LAN (RJ-45) ports | 4 |
| Chassis type | Rack (2U) |
| Product color | Black |
| Power consumption (typical) | 200 W |
| Operating altitude | 0 - 2286 m |
| Non-operating altitude | 0 - 12192 m |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 10 - 35 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 8 - 85 % |
| Sustainability certificates | RoHS |
| Number of Processing Die Transistors | 410 M |
Weight and Dimensions| Depth | 660 mm |
|---|---|
| Width | 430 mm |
| Height | 88 mm |
| Weight | 19500 g |
Describes how to view existing Storage Pools and the graphical representation of drives within the enclosure.
Details initial array provisioning and characteristics of Storage Pools, including name, protection, and capacity.
Explains the process of creating a new Storage Pool, selecting drives, and choosing RAID protection types.
Guides users on creating shared folders within a Storage Pool for multiprotocol access.
Provides instructions for creating iSCSI drives (LUNs) within a selected Storage Pool.
Details procedures for migrating RAID 5 and RAID 6 pools by adding new drives while data is online.
Explains how to migrate a RAID 10 (2-drive) Storage Pool to RAID 5 by adding drives.
Describes migrating a RAID 5 Storage Pool to RAID 6 by adding additional drives.
