Need help?Do you have a question about the Iomega StorCenter px12-400r and is the answer not in the manual?
General| Model | px12-400r |
|---|---|
| Product Family | StorCenter |
| Maximum Raw Capacity | 48 TB |
| Drive Bays | 12 |
| Processor | Intel Atom D525 1.8 GHz |
| eSATA Ports | 1 |
| Network Protocol | TCP/IP |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Frequency Required | 50/60 Hz |
| Device Type | NAS |
| Form Factor | Rack-mountable |
| Drive Interface | SATA |
| Supported Drive Types | SATA hard drive |
| RAID Support | 0, 1, 5, 6, 10 |
| Memory | 2 GB DDR3 |
| Network Interfaces | 2 x Gigabit Ethernet |
| USB Ports | 2 x USB 2.0 |
| Supported Protocols | CIFS, NFS, AFP, FTP, HTTP |
| Management | Web-based GUI |
| Height | 3.5 in |
| Nominal Voltage | 100-240V |
Details the initial setup process for the Iomega StorCenter px12-400r.
Provides methods to discover the Iomega device if it is not automatically found.
Guides the user through connecting the device to the network.
Explains how to configure network connectivity and parameters.
Provides steps to create new shares on the device.
Defines the Personal Cloud feature and its purpose.
Step-by-step guide to setting up a new Personal Cloud.
To Next Page