Need help?Do you have a question about the Iomega ZIP drive 100 and is the answer not in the manual?
General| Storage Capacity | 100 MB |
|---|---|
| Media Type | ZIP disk |
| Form Factor | External |
| Average Seek Time | 29 ms |
| Average Latency | 8.33 ms |
| Drive Type | Removable |
| Interface | SCSI, Parallel Port |
| Dimensions | Varies by model |
| Weight | Varies by model |
Unpack the Zip drive, accessories, and follow initial safety precautions before installation.
Connect the data cable to the Zip zoom board, ensuring correct pin alignment.
Locate and firmly insert the Zip zoom board into a vacant expansion slot.
Locate a vacant drive bay and prepare it for the Zip drive, including 3.5-inch bay adjustments.
Connect the computer power supply cable and the data cable to the Zip drive.
Secure the drive in the bay, check connections, replace the computer cover, and power on.
Insert the 100MB Zip tools disk and the install diskette to begin software installation.
Operate the Zip drive, access it, store files, and understand status lights and buttons.
Proper storage of Zip disks and the functionality of the automatic drive sleep mode.
How to eject a disk using the manual lever during a power failure.
Compatibility details for using third-party SCSI adapters with the Zip drive.
Information on the software tools disk and its utilities for drive management and protection.
Explanation of software-based read/write protection and password features for Zip disks.
Guidelines for connecting multiple SCSI devices and proper termination.
Details on factory settings and optional configurations for the Zip zoom board.
Solutions for problems encountered during Zip drive installation and operation.
To Next Page
