Iomega ZipCD 650 User Manual

Internal ZipCD
™
ATAPI Drive
PC Quick Install
W
R
I
T
I
N
G
P
H
O
N
E
S
D
I
S
C
I
N
O
P
E
N
C
L
O
S
E
!
Recordable
ReW
ritable
650

Iomega ZipCD 650 Specifications

General

Interface	USB 1.1
Capacity	650 MB
Buffer Size	2 MB
Rewrite Speed	4x
Type	CD-RW
Write Speed	4x
Read Speed	6x

Summary

Internal ZipCD ATAPI Drive PC Quick Install

Start Computer and Insert Software Disc

Begin the installation process by starting the computer and inserting the ZipCD software disc.

Configure Drive Jumpers

Adjust the drive's jumper settings to Master, Slave, or Cable Select as required.

Prepare PC for Hardware Installation

Shut down the computer, disconnect power, and remove the computer case cover.

Select IDE Interface Connection

Connect the drive to the secondary IDE channel, choosing master or slave configuration.

Install Drive into Drive Bay

Locate a vacant 5.25-inch drive bay and slide the ZipCD drive into it.

Connect IDE Data and Audio Cables

Connect the IDE data cable to the drive and motherboard, and optionally the audio cable.

Connect Power Supply Cable

Connect a computer power supply cable securely to the ZipCD drive.

Secure Drive and Finalize Installation

Secure the drive in the bay and check all connections before replacing the cover.

Drive Usage and Media Types

Information on using the drive and tips for CD-R and CD-RW media.

Access User Manual and Support Resources

Guidance on viewing the user manual and finding worldwide support options.

Product Compliance and Manufacturer Information

Details on CE compliance, model numbers, and Iomega Corporation contact information.