Need help?Do you have a question about the Iomega StorCenter px2-300d and is the answer not in the manual?
General| Model | px2-300d |
|---|---|
| Category | Storage |
| Form Factor | Desktop |
| Total Drive Bays | 2 |
| Network Interface | Gigabit Ethernet |
| Maximum Internal Raw Capacity | 6TB (2 x 3TB) |
| Supported Drive Types | 3.5" SATA II |
| RAID Support | RAID 0, 1 |
| RAM | 512 MB |
| USB Ports | 2 |
| Protocols | AFP |
| Power Supply | External |
Offers troubleshooting steps for device discovery issues.
Instructions for physically connecting the device to a network.
Explains storage pools, data protection, and volumes.
Details how to modify RAID levels for data redundancy.
Procedure for installing new hard drives for storage expansion.
Overview of the different methods for backing up and restoring data.
Importance and steps for enabling device security.
Comprehensive guide to remote access and sharing via Personal Cloud.
Step-by-step instructions for setting up a personal cloud service.
Process for checking and installing device firmware updates.
Saving and restoring device settings and configuration information.
Description of the device's front and rear panel components.
To Next Page