18
PC Installation
Follow the screen instructions to install the
software. You may need to restart your computer
and restart Setup to complete the installation. Check
below for additional instructions for your system.
M IMPORTANT! Installing the Iomega software package installs
the software drivers needed for your Zip
®
drive. If the drivers are
not installed, the Zip drive may not be recognized or may not work
correctly on the system. M
M What’s in Iomega software? See page 26 for a description of
the programs included on the IomegaWare
™
CD. See page 28 for
information on how to get help using Iomega software. M
Windows
®
95/98 Users During the software installation you will
see a Guest window that allows you to choose the drive letters you want
to use for your Zip drive and other removable drives. If installing the
Zip drive has caused your CD-ROM drive letter to change, you should
change it back. (This will prevent having to reinstall any applications or
games you run from the CD-ROM drive.)
To change a drive letter, click the drop-down arrow next to it and select
the drive letter you want to use. Note that drive letter changes will not
take effect until you reboot your system.
Windows NT
®
Users If your Zip drive is connected to a new
adapter card, you must install the driver software for the adapter on
your Windows NT system. If your Zip drive is connected to a Zip
Zoom SCSI card, refer to pages 20 and 21 for instructions on installing
the necessary driver software. If your Zip drive is connected to some
other adapter, refer to the documentation that came with the adapter
or refer to your Windows NT documentation for instructions on
installing a SCSI adapter.
If you encounter problems installing the software,
check the Troubleshooting section starting on page 35.
Congratulations! When the software installation
is complete, your Zip
®
drive will be ready to use.
For information on using your new Zip drive and Iomega software,
refer to the User's Guide starting on page 22.
11
To Next Page
Loading...
