9
Mac Installation
8
9
Start your Mac and insert the IomegaWare
™
CD.
M No CD-ROM drive? If you want to install your Zip
®
drive on a
computer that does not have a CD-ROM drive, you can download
Iomega software from the Internet. Refer to “How to Install
Without a CD-ROM Drive” on page 10 for additional information. M
Double click the Iomega Installer icon.
Follow the onscreen instructions to install the Iomega software. If
you encounter any problems, refer to Troubleshooting on page 35.
Congratulations! When the software installation
is complete, your Zip
®
drive will be ready to use.
Use your Zip
®
drive just like any other drive on your
system.
Your Zip disk will appear as an icon on your Mac Desktop.
You can store and copy files to and from the Zip disk using the same
methods you use for your Mac hard disk or floppy disks. For more
information on using your Zip drive and Iomega software, refer to
the User's Guide section in this manual starting on page 22 or to the
electronic documentation installed on your Mac hard disk inside the
IomegaWare folder.
To Next Page
Loading...
