Ion Technologies B-1000 - Getting Started and Operation; Collector Rod and Cover Latch; Operating Modes

Figure 1
FEATURES
● ELECTROSTATIC COLLECTING
● OZONE FILTER and ACTIVATED CARBON FILTER
● POWERFUL UV LAMP
● NEGATIVE IONIZER
OZONE SAFETY INSTRUCTIONS
The electrostatic/ionic air purifier will produce small amounts of ozone as
a by-product. This unit complies with the requirements of UL 867 for
acceptable levels of ozone (less than 0.05 parts per million by volume of
air circulating through the product).
People with a history respiratory problems or lung disease should consult
a physician before using this product.
CAUTION: Keep electrical appliances out of reach from children or infirm
persons.
Do not let them use appliance without supervision.
GETTING STARTED
1. Select a firm level and flat location. For proper air flow, place the unit at
least 3 feet from any wall or furniture.
2. Ensure that no grills are blocked.
3. Plug the terminal of adapter into the purifier then plug the adapter
directly into an AC outlet.
4. Do not lift the unit by the top cover. Always lift it by the handle on the rear
of the unit.
OPERATING INSTRUCTIONS (See Figure 2)
1. Ensure the collector rod is firmly seated in place and the top cover is
securely latched.
2. Turn the selector switch on the top of unit to LOW or HIGH mode.
3. The power light will illuminate automatically.
4. To switch off, turn the selector switch to OFF position.