9
Problem Solution Please see:
No Songs appears
even when a USB
device is inserted.
Disconnect and reconnect the USB device
to make sure it is securely inserted.
Make sure the USB device is of a mass
storage class or compatible with MTP.
Make sure the USB device is formatted
using a FAT16 or FAT32 file system.
Do not use a USB hub or USB extension
cable.
Not all USB devices are guaranteed to
work; some may not be recognized.
Operation > Playing
Audio Files
Files on a USB device
do not appear.
Make sure the files are of a supported file
format. Only mp3 and wma files are
supported on USB. Files that are not
supported by this unit will not appear.
Make sure the USB device uses a folder
structure that the unit supports: up to 999
folders (up to 8 folder levels, including the
root) and up to 999 files.
If your USB device is partitioned, make
sure the files are in the first partition. The
unit will not show other partitions.
Operation > Playing
Audio Files
Files on a USB device
cannot play.
Make sure the files are of a supported file
format. Only mp3 and wma files are
supported on USB. Files that are not
supported by this unit will not appear.
Make sure the files are not copyright-
protected. The unit cannot play copyright-
protected files.
Operation > Playing
Audio Files
The source sound is
too low, or the sound
has noise.
Make sure the volume is properly set.
The Aux In and Line In inputs are line-
level. Your audio sources must be line-
level (no phono-level turntables).
Operation > Playing
Audio From an
External Device
Using the radio
produces noise.
Make sure the antenna is properly
connected.
Change the position or orientation of the
antenna.
Use an outdoor FM antenna (not included).
Move the antenna away from other cables.
Operation > Using
the Radio
To Next Page
Loading...
