ION PARTY BOOM PLUS - Page 8

ION Audio Party Boom™ Plus User Guide 8
3. Play/Pause / Presets Button
Press this button to start and stop Bluetooth or USB audio.
In FM mode, press this button to save and recall radio presets. See O
peration > Using the
R
adio for more details.
4
. Bluetooth® Button
Press this button to enter Bluetooth pairing mode. When connected to a Bluetooth device,
press this button to disconnect a paired device and re-enter pairing mode. Once
disconnected, press this button to re-pair to the last connected device. See O
peration >
P
airing a Bluetooth® Device to learn how to connect a Bluetooth device.
Press and hold this button to enable or disable voice prompts.
5
. Stereo-Link™ / Repeat Button
Press and hold this button to start stereo-linking to another Party Boom™ Plus. See
O
peration > Linking Two Speakers for more details.
In USB mode, press this button to change the playback mode. See O
peration > USB Mode
for more details.
6
. Source Button
Press this button to cycle between FM, USB, and Aux modes. The current mode will be
shown on the D
isplay.
7
. Lights Button
Press this button to cycle through the 10 light modes. See O
peration > Light Modes for
more information.
8
. BOOM Button™
Press this button to simultaneously enhance the bass EQ and volume and activate a light
show that pulses to the beat of the music.
9
. EQ Button
Press this button to cycle through the Low, Mid, and Hi EQ frequencies. Then press the
V
OL +/- buttons to adjust the EQ frequency settings from -12 to +12.
1
0. USB Charge/Playback Port
You can use this port for charging the USB device, such as a tablet or smartphone. To
charge a device that is streaming music via Bluetooth, pause the music first and then wait
for it to reconnect after the USB cable (not included) is inserted.
You can also connect a USB flash drive here to play music. See O
peration > USB Mode for
more information.