IONFILTER Columbia Soda Upper - How to Dispense Water; Technical Specifications

Instructions Manual
EN
7. TECHNICAL CHARACTERISTICS
Control type: temperature probe.
Water inlet connection: 1/4”
CO2 inlet connection: 5/16” (8mm)
Dimensions:
(A x B x C x D en mm): 420 x 420 x 180 x 300
Cooling power: 130W A
Cooling capacity
Cold water: 8 l/h
Sparkling water: 10 l/h
Sparkling water: 10 l/h
Cooling gas: R600a
Weight of the equipment: 23 kg
Power supply: 220-240V/50Hz
6. HOW TO DISPENSE WATER
Place your recipient under the outlet nozzle.
Touch the cold water selector once to dispense cold
water. Touch it again to stop.
Touch the sparkling water selector once to dispense
sparkling water. Touch it again to stop.
Touch the water at room temperature selector once to
dispense water at room temperature. Touch it again to
stop.
The dispenser stops the water flow after 60 seconds if
not stopped manually.
It is recommended not to draw more than 1.5 litres at
a time.
A
B
C
HYDRAULIC DIAGRAM
CO₂
TANK
ROOM WATER
ROOM EV
INLET
GAS EV
PUMP
COLD EV
COMPRESSOR
SPARKLING WATER
COLD WATER
D