Need help?Do you have a question about the IONFILTER LATT and is the answer not in the manual?
Explains the natural osmosis process and reverse osmosis principles.
Read warnings in the Technical Manual for proper operation.
Equipment improves water quality; not a purifier. Periodic maintenance by qualified personnel is required.
Steps for extended periods of inactivity and advice on sanitation.
Emphasizes cleaning the osmosis faucet using specific sanitizing sprays and towels.
Advice on feeding other points and using plastic tubing; low mineralization aspect.
Describes the water flow through filters, membranes, pump, and tap.
Highlights the electronic controller managing system functions and security.
Stresses the need for regular maintenance to ensure water quality.
Lists common issues like leaks, no production, taste/smell, and their solutions.
Details the reverse osmosis application and its purpose in improving drinking water.
Lists minimum percentage reductions for salts and substances like Sodium, Calcium, etc.
Specifies pressure, TDS, temperature, and hardness limits for pump unit.
Clarifies equipment is not a potabilizer and requires public supply water or analysis.
Specifies temperature limits, salinity, and hardness recommendations.
Guidelines on installation location, space, avoiding heat sources, and hygienic conditions.
Highlights regular maintenance by qualified personnel and initial usage flushing.
Instructions for checking equipment for transit damage and reporting claims.
Emphasizes installation by qualified staff and reading the manual.
Stresses the need for clean tools and hygienic conditions for components in contact with water.
Advice on handling equipment properly with gloves and sanitizers.
Suggests under the kitchen sink or adjacent cabinet for installation.
Details connecting faucet, drain collar, and inlet adaptor.
Explains how to use the mixing kit to adjust pH, conductivity, and chlorine.
Instructions for removing plugs and installing CF, RO, and CB filters in their housings.
Explains removing carbon dust from filters before installation or sanitization.
Procedure for sanitizing the equipment according to model and manufacturer instructions.
Steps for sealing the system, checking for leaks, and verifying pump operation.
Guides on rinsing the system and checking water quality parameters like TDS.
Highlights the need for regular maintenance to ensure optimal water quality.
Specifies replacement intervals for CF prefilter, RO membrane, and CB postfilter.
Stresses maintenance by qualified personnel using original spare parts.
Warns against using non-original parts and improper maintenance leading to warranty void.
Advice on handling consumables carefully after removing them from packaging.
Guidelines on preparation, workspace, and hygienic conditions for maintenance.
Recommends wearing gloves or protective gear when using chemicals.
Lists materials needed for the sanitization process, including hydrogen peroxide and gloves.
Provides step-by-step instructions for sanitizing the equipment during startup or periodically.
Specifies that drinking water complying with regulations must be used for sanitization.
Details the specific process for sanitizing the tap spout using spray and paper.
Describes connecting the dosing cup and manual valve for sanitization.
Instructions for pouring hydrogen peroxide and circulating it through the system.
Steps for circulating water after sanitization and flushing the system.
Instructions for rinsing the equipment with mains water to remove residues.
Guidance on rinsing the pre-filter before installation or sanitization.
Emphasizes rinsing with water compliant with local potability regulations.
Details on filling the pre-filter slowly to avoid turbulence and ensure proper rinsing.
Instruction to dry any wet parts, especially the leak detection sensor.
Describes the application as water treatment via reverse osmosis and its purpose.
Lists minimum percentage reductions for various compounds like Sodium, Chloride, etc.
Details maximum/minimum pressure, TDS, temperature, and hardness.
Explains water entry through GAC filter and control by solenoid valve.
Describes water being pushed to RO membrane by a pump and post-filter taste improvement.
Details pressure switches, leak detection, and water quality monitoring.
Describes the display indicators for water quality and filter life.
Details cleaning procedures for first use, switched on, after time, and daily.
Explains washing procedures after changing CF, RO, or CB filters.
Describes system status upon opening or closing the tap.
Explains the light status and color changes during system startup.
Lists fault types (pressure, leakage, pump protection) with display, acoustics, and solutions.
Shows filter lifespan indicators (days/litres) and associated alerts.
Explains how to activate manual washing mode by pressing buttons.
Details the two-year guarantee, including repair, replacement, labor, and shipping costs.
Lists conditions that void the warranty, like wear, lack of maintenance, improper use, or unauthorized repairs.
Outlines distributor's role in ensuring equipment suitability, correct installation, and liability for non-conformity.
States the necessity of presenting the purchase invoice for any warranty claim.
Section for recording pre-treatment, hardness, TDS, pressure, and installation results.
Instructions for technicians regarding manual review, contact, and data transcription.
Fields for recording water origin, pre-treatment, hardness, TDS, and pressure.
Checklist for installation steps like by-pass, drainage, testing, and programming.
Owner's statement confirming understanding of use, maintenance, and offer of maintenance contract.
Details distributor's responsibility for part replacement and costs.
Fields for date, service type (full, preparation, hygienization, other), technician details, and service status.
General| Brand | IONFILTER |
|---|---|
| Model | LATT |
| Category | Water Dispenser |
| Language | English |
To Next Page