ionmax Leone ION625 User Manual (English)

Questions and Answers:

H
Heather MurphyAug 11, 2025
Why is my ionmax Dehumidifier not operating?
- C
  Colin TorresAug 11, 2025
  There are several reasons why your ionmax Dehumidifier might not be working: * **Unplugged:** Ensure the power plug is fully inserted into the electrical outlet and switched on. * **Full Tank:** Empty the water tank and reinstall it correctly. * **Temperature:** The unit has a self-protection mechanism and will not work if the room temperature is less than 5°C or more than 35°C. This is normal. * **Humidity Setting:** If the room humidity has reached the set level, choose a lower relative humidity setting. * **Overheating:** The unit may overheat in small, closed spaces. Move it to a cooler place and wait at least 10 minutes before resuming operation. * **Dirty Filter:** Clean the air filter.
G
Gordon FreemanAug 21, 2025
What to do if my ionmax Leone ION625 is leaking?
- L
  Louis GibsonAug 21, 2025
  If your ionmax Dehumidifier is leaking, check the following: * **Level Surface:** Make sure the unit is placed on a level surface and not resting on anything like a cable. * **Drainage Hose:** Ensure the drainage hose is firmly attached to the continuous drainage outlet. * **Hose Condition:** The hose should lead to a drain at a downward slope without sharp bends. * **Moving the Unit:** Always empty the water tank before moving the unit.
H
hicksjerryAug 30, 2025
Why is my ionmax Leone ION625 so noisy?
- E
  Elizabeth MartinAug 30, 2025
  There are several reasons why your ionmax Dehumidifier might be noisy: * **Uneven Surface:** Move the unit to a flat and level surface. * **Dirty Filter:** Clean the air filter. * **Water Flowing Sound:** This noise is normal and comes from the flowing refrigerant. * **Incorrect Humidity Level:** Set the desired humidity level lower than the current room humidity level. * **Delayed Compressor Start:** Allow a few minutes for the compressor to settle down before it is switched on.