iOttie Easy One Touch Mini - Installation; Assembling the Mount; Selecting a Location

Installation
A. Connect the Mount Cradle with
the Ball Joint.
Choose an installation method: Dashboard/Flat Surface (A) or
Windshield/Curved Glass (B).
Choose an area on a flat surface on the vehicle’s dashboard
and wipe any dust or debris from the surface.
B. Then, tighten the Cradle Knob.
2. Selecting a Location
1. Assembling the Mount
Option A
Dashboard or Flat Surface Installation
2. Peel o the protective
film on the Suction Cup
and press mount firmly
onto the dashboard pad.
3. Push Locking Lever
down to engage
suction.
STICKY SUCTION CUP
1. Peel o the film
on the dashboard
pad & stick on the
desired installation
location.
1. Peel o the protective film on the
Suction Cup and press firmly onto
the windshield.
Choose a location on the windshield and wipe any dust or debris from
the surface. Dashboard Pad not necessary for windshield installation.
2. Push Locking Lever down to
engage suction.
Option B
Windshield Installation or Curved Glass Installation
STICKY SUCTION CUP
Additional Information
To reuse Suction Cup, simply rinse under warm water and let air dry
to restore tacky suction.