20
Attended: Press Trnsfer, enter the destination number and press
Send or the Dial key where present. Speak to the callee when
answered. Press Trnsfer when ready to transfer the call.
Setting up a 3-way Conference
Call the first party as normal. To add the 3rd party, press Confrnc,
enter the destination number and press Send or the Dial key where
present. Speak to the callee when answered, and press Confrnc
when ready to complete the 3-way conference.
Picking up Voicemail
Press the Messages button on the handset, or on smaller phone
models, press Msgs on the LCD screen. Use the up/down arrows to
select the mailbox to connect to and press Connect.
On smaller phones when no voicemail is waiting, the Msgs button is
unavailable - In this case it is necessary to dial the short-code that
has been configured on your PABX
Aastra 9112i
Placing a Call
There are 3 ways to place a call:
1
Completely Handsfree - Dial the number and press “Dial”.
2
Handsfree Dialling - Dial the number and pick up the handset.
3
Handset dialling - Pick up, dial the number and press “Dial”.
In handsfree mode, the handset may be picked-up at any time.
Answering a Call
1
Headset/Handsfree - Press the “speaker/headset” button.
2
Handset - Pick up the handset.
Answering multiple calls
Press the “Swap” key to switch between the two available lines. This
phone only has 2 lines available.
Transferring a Call
Unattended: Press “Xfer”, enter the destination number and press
“Dial”. Press “Xfer” again.
Attended: Press “Xfer”, enter the destination number and press
“Dial”. Speak to the callee when answered. Press “Xfer” when ready
to transfer the call.
To Next Page
Loading...