Page 22
4. SAFETY INFORMATION
4.1. Safety regulations
Read the "User Manual" carefully before start-up and use or before performing
maintenance, routine servicing or any other work on the machine.
IMPORTANT
Rigorously respect all instructions in the Manual (in particular those relating to danger
and important information) and on the safety plates fitted to the machine.
The Manufacturer declines all liability for damage to people or things resulting from
failure to observe the instructions.
The appliance must be used exclusively by persons trained in its use and/or who have
demonstrated their ability and have been expressly instructed to use the appliance.
The machine must not be used by minors.
The machine must not be used for purposes other than those for which it was expressly
designed. Assess the type of building in which the machine is to be operated (eg:
pharmaceutical or chemical companies, hospitals, etc) and scrupulously respect all
applicable safety standards and conditions.
This machine is intended for use in commercial applications, such as hotels, schools,
hospitals, factories, shops and offices, or for hire.
Do not use the machine in places with inadequate lighting or explosive atmospheres, on
public roads, in the presence of dirt hazardous to health (dust, gas, etc) and in unsuitable
environments.
The machine must only be used indoors.
The machine is designed for temperatures of between +4°C and +35°C when in use and
between +0°C and +50°C when not in use.
The machine is designed to work in a humidity of between 0% and 95%.
Warning, the machine must be kept indoors at all times.
Never use or pick up flammable liquids or explosives (e.g. petrol, fuel oil, etc), flammable
gases, dry dusts, acids and solvents (e.g. paint solvents, acetone etc) even if diluted. Never
pick up flaming or incandescent objects.
Never use the machine on slopes or ramps of more than 2%. In the case of slight slopes, do
not use the machine transversally, always manoeuvre with care and do not reverse. When
transporting the machine on steeper ramps or slopes, take the utmost care to avoid tipping
up and/or uncontrolled acceleration. Move the machine on ramps and/or steps only with the
brush head and squeegee raised.
Never park the machine on a slope.
To Next Page
Loading...
