EasyManua.ls Logo

IPC PW-H10 - Preparing the Cleaner; Fitting the Handlebar; Fitting the Lance; Fitting the Rear Tank

IPC PW-H10
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
- 15 -
Water circuit connection. Electrical connection.
TRANSLATION OF ORIGINAL INSTRUCTIONS
The text has been carefully checked, however any misprints should be notied to the manufacturer.
The manufacturer also reserves the right to alter and update this publication without prior notice for the sake of
product improvement.
All reproductions of this manual, in whole or in part, are forbidden without the manufacturer's authorization.
Continue reading this manual without connecting the cleaner to the power mains and the water supply.
PREPARING THE CLEANER
for buying this cleaner. You have shown that you do not accept compromises: you want the best.
We have prepared this manual to enable to fully appreciate the qualities and high performance that this cleaner can offer you.
Please read it completely before using the machine.
The CE mark on your cleaner shows that it has been constructed in compliance with the European Standards on safety.
We can also offer you a wide range of cleaning machines such as:
VACUUM CLEANERS, FLOOR CLEANERS, FLOOR SWEEPERS and a complete range of ACCESSORIES, CHEMICALS
and DETERGENTS suitable for cleaning all kinds of surfaces.
Ask your Dealer for the complete catalogue of our products.
Congratulations! We wish to thank you
Fitting the rear tank.
BBB
CCC
AAA
B
C
A
BBB
CCC
AAA
B
C
A
Fitting the lance.
Fitting the handlebar
30 mA

Related product manuals