IPC PW-H10 - Storage and Disposal; Periods of Inactivity; Scrapping and Disposal

English
- 25 -
IMPORTANT:
These intervals refer to normal working conditions. For heavy duty use decrease the interval for each job.
For maintenance and/or repairs, use only original spare parts which offer the greatest characteristics of quality and
reliability. Failure to use original spare parts absolves the manufacturer from all liability and transfers it to the
person carrying out the operation.
PERIODS OF INACTIVITY
Ifthemachineistoremaininactiveforalongperiod,disconnectthesupplysources,drainthetank(s)ofalltheoperatinguids
and protect any parts that could be damaged by the accumulation of dust.
Grease the parts that could be damaged by drying out, such as the supply hoses. When bringing back into use, ensure that
there are no cracks or cuts in the water supply hoses.
Oil and chemical products must be disposed of according to current legislation.
SCRAPPING
If you no longer wish to use the water cleaner, you should render it unusable by removing the power cable.
You should also make sure that all potentially hazardous parts of the appliance are made safe, particularly for children who could
play with the unused water cleaner.
ThisproductisclassiedasWEEEtypespecialwasteandiscoveredbytherequisitesofthenewenvironmentalprotection
regulations. It must be disposed of separately from ordinary waste in compliance with current legislation and standards.
Do not use parts dismantled for scrap as spare parts.