Fixed Feature button definition
LDP-9030D Digital Telephone Description Quick Guide
Button Description
3 Soft
Used in conjunction with fixed and flexible features, and the function changes in
relation to call progress, as indicated on the LCD display.
Page Used to change more additional functions on the LCD display .
Trans/PGM
This button is used to initiate a call transfer (TRANS) or to enter programming
mode (PGM).
Speed
Used to access speed dialing, speed programming, save number redial, and last
number redial.
DND
The DND (Do Not Disturb) feature blocks all calls. When DND is active, the red
LED in this button is illuminated. When pressed after the Speaker button it is
used for setting call forwarding. Used by the attendant to set the Day/Night mode.
Call Back
A station can initiate a call back request to a busy station. Once that station
becomes idle, the initiating station is signaled.
Mute Toggle outgoing audio; red LED illuminates.
Volume
The volume button adjusts the audio levels for ringing, handset and
speakerphone functions.
Speaker
Speaker toggles the speakerphone state, and the red LED is illuminated when
the speakerphone is active.
Hold/Save This button is used to put a call on hold or save information when programming.
30 Flexible
Some flexible buttons are pre-programmed in the system for line appearances,
loop functions etc. The remaining flexible buttons can be user-programmed.
Visual Ringing LED Illuminates when there is a message (in some cases when phone is ringing).
LCD Display
Displays information about telephone status, dialing directories, and message
information.
Hands-free Microphone Microphone is used for hands-free speakerphone function.
To Next Page
Need help?
General
