EasyManua.ls Logo

iProtec LG110LR - User Manual

iProtec LG110LR
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WARNINGS AND LABELS
AVOID DIRECT EYE EXPOSURE AB12A
This Laser Product is designated as Class 3R during all procedures of Operation.
· Wavelength: 650nm
· Laser Power for classification: <5mW CW
LASER LIGHT - AVOID DIRECT EYE EXPOSURE
CAUTION - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
DO NOT POINT LASER OR ALLOW LASER LIGHT TO BE DIRECTED OR REFLECTED TOWARD OTHER PEOPLE OR REFLECTIVE
OBJECTS. USE CAUTION AROUND FACE AND EYES.
IMPORTANT WARNINGS
Night hunting with artificial light may be prohibited or restricted in your state. Please check your state’s game laws for clarification.
FAILURE TO READ AND FOLLOW THESE OPERATING INSTRUCTIONS AND WARNINGS WHEN HANDLING A FIREARM OR THIS PRODUCT
CAN BE DANGEROUS AND CAN RESULT IN SERIOUS INJURY, DAMAGE TO PROPERTY, OR DEATH.
• Use of a firearm under any circumstance may be dangerous. SERIOUS INJURY OR EVEN DEATH may result without proper training in the safe
handling of firearms. Proper training should be obtained from an accredited firearms safety program conducted by competent, qualified instructors
in the military, police academies or National Rifle Association affiliated instruction programs.
• Read your firearm’s manual before attaching your gun mounted light.
• Never point a firearm at something you are not willing to destroy.
• iPROTEC recommends that this product should only be activated with the non-trigger hand while employing a two-hand grip on the firearm and with
the trigger finger outside the trigger guard when possible. Failure to do so could result in an accidental discharge and serious injury, damage to
property, or death.
• Thoroughly practice (employing safe training conditions) with this item and firearm before using the weapon in a tactical situation.
BEFORE ATTACHING, INSPECTING OR SERVICING A FIREARM-MOUNTED LIGHT/LASER
1. Engage the safety on the firearm if applicable.
2. Remove the magazine from the firearm if applicable.
3. Open the action and inspect the chamber to be sure it is empty.
IT IS IMPERATIVE THAT SAFETY MEASURES BE EMPLOYED AT ALL TIMES WHILE
HANDLING THE FIREARM.
MAINTENANCE
If the laser stops working, replace the batteries as shown.
A drop of 3-in-1 oil on the mounting hinge can be added to ease movement.
There is no other scheduled maintenance or service that can be performed by the user. Other than battery replacement, this product must not be
opened or modified by the user. If any repair or service is required, please return the product to Alliance Sports Group in accordance with the product
warranty.
BATTERIES
WARNING: FIRE, EXPLOSION, BURN HAZARD.
USE ONLY: USE only AAA Alkaline Battery. Use of other batteries or mixing of used and new or different brand batteries may result in leakage, fire
or explosion and serious personal injury. DO NOT recharge, misuse, short circuit, improperly store or discard, disassemble, or heat above 212°F
(100°C). Keep away from children.
USE ONLY THOSE BATTERIES SPECIFICALLY RECOMMENDED FOR USE IN THIS PRODUCT.
USER MANUAL
ITEM#6105
110 LUMEN LED LIGHT & LASER
WITH UNIVERSAL LONG GUN MOUNT
LG
110
L R
With Changes As is
Question and Answer IconNeed help?

Do you have a question about the iProtec LG110LR and is the answer not in the manual?

Summary

Laser Safety and Important Warnings

Laser Safety Precautions

Class 3R laser product. Avoid direct eye exposure and pointing laser light at people or objects.

Important Usage Warnings

Follow instructions for safe firearm handling and product use to prevent injury, damage, or death.

Product Maintenance and Battery Guidelines

Maintenance Instructions

Replace batteries when needed. Lubricate mounting hinge. Do not open or service product yourself.

Battery Safety and Usage

Use only specified AAA batteries. Do not recharge, mix, or misuse batteries to avoid hazards.

Operating and Installing the LG110 LR

Battery Installation Guide

Step-by-step instructions for inserting 3 AAA batteries into the device correctly.

Light and Laser Modes

Details on High, Red Laser, Light & Laser, and Defensive Strobe modes with performance specs.

Pressure Switch Operation

How to use the remote pressure switch for momentary activation and mode navigation.

Mounting, Support, and Final Safety

Mounting Instructions

Guide on how to attach the flashlight securely to a long gun barrel or accessory rail.

Quality Guarantee

One-year warranty covers defects in workmanship and materials for the original owner.

User Safety Reminders

Avoid eye injury from direct beam. Supervise children. Do not mix battery types.

Overview

The iPROTEC LG110LR is a versatile firearm-mounted accessory combining a 110-lumen LED light and a red laser, designed for use with long guns. This device is classified as a Class 3R laser product with a wavelength of 650nm and a laser power of less than 5mW CW.

Function Description:

The LG110LR serves multiple functions:

  • High-Intensity White Light: Provides 110 lumens of white light for illumination, suitable for general flashlight use.
  • Red Laser: Offers a red laser for aiming and targeting.
  • Light & Laser Combination: Allows simultaneous use of both the white light and red laser.
  • Defensive Strobe Mode: Features a strobe function for disorienting potential threats.

Important Technical Specifications:

  • Light Output: 110 lumens (High mode)
  • Laser Wavelength: 650nm
  • Laser Power: <5mW CW (Class 3R)
  • Power Source: 3 AAA alkaline batteries
  • Run Time (High Light): 7.5 hours
  • Viewing Distance (High Light): 50 meters
  • Run Time (Red Laser): 47.5 hours
  • Laser Distance (Red Laser): 412 meters
  • Run Time (Light & Laser): 6.5 hours
  • Run Time (Defensive Strobe): 6.75 hours
  • Mount Adjustment Range: 20mm to 32.5mm
  • Accessory Rail Mount Dimensions: 18mm x 24mm

Usage Features:

The LG110LR offers flexible operation through two main interfaces: a standard end cap and a pressure switch for remote operation.

Standard End Cap Operation:

The standard end cap allows for direct control of the light modes via a side button:

  • HIGH (110 Lumens): Click the side button once for 110 lumens of white light.
  • RED LASER: From the previous mode, click the side button for the red laser.
  • LIGHT & LASER: From the previous mode, click the side button for both light and laser.
  • DEFENSIVE STROBE: From the previous mode, click the side button for the defensive strobe mode.

Pressure Switch Operation (Remote Operation):

For remote activation, the pressure switch provides momentary control:

  • Activation: The pressure switch activates the currently selected light mode only when pressure is applied to the button.
  • Navigation: The side button on the flashlight itself is used to cycle through the different light modes. To navigate modes with the pressure switch, press the momentary button (1) to activate, then use the side button (2) on the flashlight to cycle through the desired lighting modes.

Mounting Instructions:

The device features a universal long gun mount with a patented accessory rail mount system.

  1. Select a suitable location on the long gun that does not interfere with its operation.
  2. Place the two halves of the mount on either side of the barrel and flashlight. The mount is adjustable from 20mm to 32.5mm.
  3. Tighten the mount using its latch.
  4. Secure the latch in the locked position and test the flashlight for functionality.
  • Safety Precaution: Always ensure the firearm's safety is engaged and it is unloaded before attaching, inspecting, or servicing the light/laser.

Important Safety Warnings:

  • Laser Safety: AVOID DIRECT EYE EXPOSURE. Do not point the laser or allow its light to be directed or reflected toward people or reflective objects. Use caution around the face and eyes.
  • Firearm Safety: Failure to read and follow operating instructions and warnings can lead to serious injury, property damage, or death. Always obtain proper training in firearm safety. Never point a firearm at anything you are not willing to destroy. iPROTEC recommends activating the product with the non-trigger hand while maintaining a two-hand grip and keeping the trigger finger outside the trigger guard to prevent accidental discharge.
  • Night Hunting: Check state game laws as artificial light use may be prohibited or restricted.

Maintenance Features:

  • Battery Replacement: If the laser stops working, replace the 3 AAA alkaline batteries. Ensure the negative end (-) faces the spring. Do not mix old and new batteries, different brands, or types (alkaline, standard, rechargeable). Dispose of old batteries properly.
  • Mount Hinge: A drop of 3-in-1 oil can be applied to the mounting hinge to ease movement.
  • User-Serviceable Parts: Other than battery replacement, there is no scheduled maintenance or service that can be performed by the user. The product must not be opened or modified. For any required repair or service, the product should be returned to Alliance Sports Group in accordance with the product warranty.
  • Battery Warnings: Batteries pose a fire, explosion, and burn hazard. Do not recharge, misuse, short circuit, improperly store or discard, disassemble, or heat above 212°F (100°C). Keep away from children. Use only AAA alkaline batteries specifically recommended for this product.

The iPROTEC LG110LR is designed for tactical situations, offering reliable illumination and aiming capabilities with robust mounting and user-friendly controls, while emphasizing critical safety protocols for firearm and laser use.

iProtec LG110LR Specifications

General IconGeneral
BrandiProtec
ModelLG110LR
CategoryFlashlight
LanguageEnglish

Related product manuals