TECHNICAL INFORMATION
Model Allergen 100 HealthPro 150 HealthPro 250 GC MultiGas
Air delivery per fan speed in m
3
/h 40 70 110 150 240 380 40 80 140 190 240 350 40 80 150 200 240 380 40 85 150 210 260 360
Weight incl. filters approx.12 kg approx.14 kg approx.16 kg approx.20 kg
Power requirements 220 – 240 V / 50 – 60 Hz
Energy consumption 20 –160 W
Dimensions (H x W x D) in cm 61 x 38 x 41 71 x 38 x 41
Fan motor centrifugal, backward curved,with thermal protector, non stop use approved
Control panel 4-key touch-pad with 16 character 2-line LCD display
Air intake dual arches at base of unit
Air outlet 320° EvenFlow
™
diffuser
Colour of main housing / locking arms light grey / white light grey / light blue
Housing material non-offgasing, impact-resistant, UV-stabilized ABS
Efficiency
Total system efficiency ≥ 99.97% for particles ≥ 0.3 micron (µm)
≥ 99% for particles
≥ 0.3 micron (µm)
Air delivery (certified) yes
Leak tested yes
Filter Configuration
Pre-filter /
Pre & gas filter (HealthPro 150)
Type: PreMax
™
large
capacity pre-filter
Media type: wet laid non-
woven glass microfiber,
mini-pleated; efficiency
ASHRAE 85% and 55%
at 0.3 µm
Surface area:
ca. 2.8 m
2
Type: PreMax
™
MG
combined pre-, gas- and
odour-filter
Pre-filter media type:
wet laid non-woven glass
microfiber, mini-pleated,
efficiency ASHRAE 85%
and 55% at 0.3 µm
Surface area:
ca. 1.9 m
2
Gas- & odour filter media
type:
ca. 1 kg granular acti-
vated carbon & KMn0
4
im-
pregnated alumina
Type: PreMax
™
large
capacity pre-filter
Media type: wet laid non-
woven glas microfiber,
mini-pleated, efficiency
ASHRAE 85% and 55%
at 0.3 µm
Surface area:
ca. 2.8 m
2
Type: high efficiency HEPA
fine dust pre-filter
Media type: HEPA class
H11, mini-pleated with
solvent-free separators
Surface area:
ca. 2.8 m
2
Gas & odour filter
Type: V5-Cell
™
wide-spec-
trum gas and odour filter
Media type:
ca. 2.5 kg
granular activated carbon
& KMnO
4
impregnated alu-
mina
Type: 4 gas & odour control
filter cartridges (
GC-technology)
Media type MultiGas
™
:
approx. 5.4 kg granular
activated carbon & KMn0
4
impregnated alumina
HEPA-filter /
Post-filter (GC MultiGas)
Type: HyperHEPA
®
clean-
room-grade high-efficiency
particulate arresting filter
Media type: HEPA class
H12/H13, wet laid glass mi-
crofiber, mini-pleated with
solvent-free separators
Surface area:
ca. 5 m
2
Type: HyperHEPA
®
clean-
room-grade high-efficiency
particulate arresting filter
Media type: HEPA class
H12/H13, wet laid glass mi-
crofiber, mini-pleated with
solvent-free separators
Surface area:
ca. 5 m
2
Type: HyperHEPA
®
clean-
room-grade high-efficiency
particulate arresting filter
Media type: HEPA class
H12/H13, wet laid glass mi-
crofiber, mini-pleated with
solvent-free separators
Surface area:
ca. 5 m
2
Type: 4 post-filter sleeves
Media type: electrostati-
cally charged fiber
Surface area:
ca. 0.5 m
2
Features
Multiple display languages English, French, German, Italian (user-selectable)
Fan speed settings 6
Intelligent filter life monitor Monitors filter life of each individual filter
Filter life status LEDs 2 2 3 3
Advanced timer Allows programming of operating hours and weekdays
Advanced fan speed selection Allows programming of different fan speeds for 2 different time periods (e.g. day time / night time speed)
Adjustable filter load indices
2
large dust, fine dust
3
large dust, chemicals, fine
dust
3
large dust, chemicals, fine
dust
3
large dust, chemicals,
fine dust
Supplied accessories Remote control (including battery), set of casters (GC MultiGas: deluxe casters), power cord
Electrical safety approved and certified IEC/IECEE (CB-Scheme), CE, SEV, CCA, KTL, PCBC, EZU (depending on electrical requirements)
Need help?
General
